Handbook of Fuel Cells: Advances in Electrocatalysis, Materials, Diagnostics and Durability, Volumes 5 and 6 (Hardcover)

Contributors to Volume 5 and 6.

Foreword.

Preface.

Abbreviations and Acronyms.

PART 1: ELECTROCATALYST MATERIALS FOR LOW TEMPERATURE FUEL CELLS.

Novel Catalysts.

1. Platinum monolayer oxygen reduction electrocatalysts (R. R. Adzic and F. H. B. Lima).

2. Oxygen reduction on platinum bimetallic alloy catalysts (V. R. Stamenkovic and N. M. Markovic).

3. Dealloyed Pt bimetallic electrocatalysts for oxygen reduction (P. Strasser).

4. Transition metal/polymer catalysts for O2 reduction (C. M. Johnston, P. Piela, and P. Zelenay).

5. Time to move beyond transition metal-N-C catalysts for oxygen reduction (A. Garsuch, A. Bonakdarpour, G. Liu, R. Yang, and J. R. Dahn).

6. Catalysts for the electro-oxidation of small molecules (M. Watanabe and H. Uchida).

7. Influence of size on the electrocatalytic activities of supported.

metal nanoparticles in fuel cell-related reactions (Frédéric Maillard, Sergey Pronkin, and Elena R. Savinova).

8. Enzyme catalysis in biological fuel cells (Scott Calabrese Barton).

Fundamental Catalysis Models.

9. Density functional theory applied to electrocatalysis (S. Venkatachalam, and T. Jacob).

10. First-principles modeling for the electrooxidation of small.

molecules (M. Neurock).

11. On the pathways of methanol and ethanol oxidation (W. Vielstich, V. A. Paganin, O. Brandao Alves, and E. G. Ciapina).

12. Reaction pathway analysis and reaction intermediate detection.

via simultaneous differential electrochemical mass spectrometry.

(DEMS) and attenuated total reflection fourier transform.

infrared spectroscopy (ATR-FTIRS) (M. Heinen, Z. Jusys, and R. J. Behm).

13. Methanol oxidation on oxidized Pt surface (H. Varela, E. Sitta, and B. C. Batista).

14. Mechanistic aspects of carbon monoxide oxidation (T. Iwasita and E. G. Ciapina).

Catalyst Durability.

15. Platinum dissolution models and voltage cycling effects: platinum dissolution in polymer electrolyte fuel cell (PEFC) and low-temperature fuel cells (K. Ota and Y. Koizumi).

16. Catalyst and catalyst-support durability (F. T. Wagner, S. G. Yan, and P. T. Yu).

17. Effects of contaminants on catalyst activity (F. H. Garzon and F. A. Uribe).

PART 2: CONDUCTIVE MEMBRANES FOR LOWTEMPERATURE Fuel Cells.

Novel Materials.

18. Design rules for the improvement of the performance of hydrocarbon-based membranes for proton exchange membrane fuel cells (PEMFC) (M. Gross, G. Maier, T. Fuller, S. MacKinnon and C. Gittleman).

19. High-temperature polybenzimidazole-based membranes (D. C. Seel, B. C. Benicewicz, L. Xiao, and T. J. Schmidt).

20. Radiation-grafted proton conducting membranes (L. Gubler and G. G. Scherer).

21. Alkaline anion-exchange membranes for low-temperature fuel cell application (J. R. Varcoe, S. D. Poynton, and R. C. T. Slade).

Characterization.

22. Colloidal structure of ionomer solutions (G. Gebel).

23. Conductivity, permeability, and ohmic shorting of ionomeric membranes (C. K. Mittelsteadt and H. Liu).

Membrane Durability.

24. Highly durable PFSA membranes (E. Endoh).

25. Factors influencing ionomer degradation (M. Inaba and H. Yamada).

26. Chemical and mechanical membrane degradation (W. K. Liu, S. J. C. Cleghorn, B. E. Delaney, and M. Crum).

27. Mechanical durability characterization and modeling of ionomeric membranes (Y. H. Lai and D. A. Dillard).

PART 3: MATERIALS FOR HIGH TEMPERATURE FUEL CELLS.

Fundamental Models.

28. Mechanistic understanding and electrochemical modeling of mixed conducting (SOFC) electrodes (R. Merkle, J. Maier, and J. Fleig).

29. Elementary kinetic modeling of solid oxide fuel cell electrode reactions (S. B. Adler and W. G. Bessler).

30. Mechanical stability (A. Atkinson and A. J. Marquis).

Novel Materials.

31. Factors limiting the low-temperature operation of SOFCs (J. David Carter, T. A. Cruse, B. J. Ingram, and M. Krumpelt).

32. New oxide cathodes and anodes (J. A. Kilner and J. T. S. Irvine).

33. New high-temperature proton conductors for fuel cells and gas separation membranes (R. Haugsrud).

34. Nanoimpact on electrode and electrolyte layers with Micro-Electro-Mechanical System (MEMS) technique (Y. D. Premchand, A. Bieberle-Hütter, H. Galinski, J. L. M. Rupp, T. M. Ryll, B. Scherrer, R. Tölke, Z. Yang, A. Harvey, A. Evans, L. Xu, and L. J. Gauckler).

Materials Durability.

35. Durability of metallic interconnects and protective coatings (M. Mogensen and K. V. Hansen).

36. Impact of impurities and interface reaction on electrochemical activity (M. Mogensen and K. V. Hansen).

37. Application of secondary ion mass spectrometry (SIMS) technique on the durability of solid oxide fuel cell (SOFC) materials (K. Yamaji, N. Sakai, H. Kishimoto, T. Horita, M. E. Brito and H. Yokokawa).

38. Durability of cathodes including Cr poisoning (N. H. Menzler, A. Mai, and D. Stöver).

39. Durable sealing concepts with glass sealants or compression seals (H. P. Buchkremer and R. Conradt).

PART 4: ADVANCED DIAGNOSTICS, MODELS, & DESIGN.

Low-Temperature Fuel Cells.

40. Direct three-dimensional visualization and morphological analysis of Pt particles supported on carbon by transmission electron microtomography (T. Ito, U. Matsuwaki, Y. Otsuka, G. Katagiri, M. Kato, K. Matsubara, Y. Aoyama, and H. Jinnai).

41. Design approaches for determining local current and membrane resistance in polymer electrolyte fuel cells (PEFCs) (S. A. Freunberger, M. Reum, and F. N. B?uchi).

42. Heat and water transport models for polymer electrolyte fuel cells (U. Pasaogullari).

43. Proton exchange membrane fuel cell (PEMFC) down-the-channel performance model (W. Gu, D. R. Baker, Y. Liu, and H. A. Gasteiger).

44. Use of neutron imaging for proton exchange membrane fuel cell (PEMFC) performance analysis and design (T. A. Trabold, J. P. Owejan, J. J. Gagliardo, D. L. Jacobson, D. S. Hussey, and M. Arif).

45. Local transient techniques in polymer electrolyte fuel cell (PEFC) diagnostics (I. A. Schneider and G. G. Scherer).

46. Proton exchange membrane fuel cell (PEMFC) flow-field design for improved water management (J. S. Allen, S. Y. Son, S. H. Collicott).

47. Performance during start-up of proton exchange membrane (PEM) fuel cells at subfreezing conditions (E. L. Thompson, W. Gu, and H. A. Gasteiger).

48. Performance impact of cationic contaminants (B. S. Pivovar, B. Kienitz, T. Rockward, F. Uribe, and F. Garzon).

49. Modeling the impact of cation contamination in a polymer electrolyte membrane fuel cell (T. A. Greszler, T. E. Moylan, and H. A. Gasteiger).

50. Performance modeling and cell design for high concentration methanol fuel cells (C. E. Shaffer and C. Y. Wang).

51. Design concepts and durability challenges for mini fuel cells (Shimshon Gottesfeld).

High-Temperature Fuel Cells.

52. New diagnostic methods for the polarized state (T. Kawada).

53. Electrochemical impedance spectroscopy as diagnostic tool (S. H. Jensen, J. Hjelm, A. Hagen, and M. Mogensen).

54. Observation and modeling of thermal stresses in cells and cell stacks (H. Yakabe).

PART 5: PERFORMANCE DEGRADATION.

Low-Temperature Fuel Cells.

55. Carbon-support corrosion mechanisms and models (K. G. Gallagher, R. M. Darling, and T. F. Fuller).

56. Electrode degradation mechanisms studies by current distribution measurements (R. N. Carter, W. Gu, B. Brady, P. T. Yu, K. Subramanian, and H. A. Gasteiger).

57. Electron microscopy to study membrane electrode assembly (MEA) materials and structure degradation (M. Chatenet, L. Guetaz, and F. Maillard).

58. Proton exchange membrane fuel cell degradation: mechanisms and recent progress (T. Madden, M. Perry, L. Protsailo, M. Gummalla, S. Burlatsky, N. Cipollini, S. Motupally, and T. Jarvi).

59. Cold-start durability of membrane-electrode assemblies (C. Y. Wang, X. G. Yang, Y. Tabuchi, and F. Kagami).

60. Field experience with fuel cell vehicles (K. Wipke, S. Sprik, J. Kurtz, and J. Garbak).

61. Membrane and catalyst performance targets for automotive fuel cells (A. Iiyama, K. Shinohara, S. Iguchi, and A. Daimaru).

62. Field experience with portable DMFC products (J. Müller).

High-Temperature Fuel Cells.

63. Overview of solid oxide fuel cell degradation (H. Yokokawa).

64. Methane reforming kinetics, carbon deposition, and redox durability of Ni/8 yttria-stabilized zirconia (YSZ) anodes (E. Ivers-Tiffée, H. Timmermann, A. Leonide, N. H. Menzler, and J. Malzbender).

65. Sulfur poisoning on Ni catalyst and anodes (J. Bǿgild Hansen and J. Rostrup-Nielsen).

66. Ni shorting in relation to acid-base equilibrium of molten carbonate for molten cabonate fuel cell (MCFC) application (S. Mitsushima).

67. Impact of impurities on reliability of materials in solid oxide fuel cell (SOFC) stack/modules (H. Yokokawa, N. Sakai, T. Horita, and K. Yamaji).

68. Field experience with molten carbonate fuel cells (MCFCs) and solid oxide fuel cells (SOFCs) with an emphasis on degradation (H. Frey, A. Kessler, W. Münch, M. Edel and V. Nerlich).

Subject Index.