Mechatronics Engineering and Electrical Engineering : Proceedings of the 2014 International Conference on Mechatronics Engineering and Electrical Engi (Hardcover)

Battlefield situation cognition system based on big electronic reconnaissance data processing
S.M. Xu, H.B. Yu & F.H. Chu
Automatic recognition of waste rock in top coal caving based on digital image processing
B.P. Wang, Y.J. Wang & Z.C. Wang
The application of Dijkstra algorithm based on multi-weighted distribution in GIS
Sh.M. Wang, H.T. Luo & B.W. Wang
Design of battery charging and discharging circuit
H.Q. Zhan & Z.P. Li
Automatic flight control of a certain UAV using LQG design
Sh.Y. Zhang
Research on online and remote calibration technology of electronic belt scale based on weights superposition method X.P. Shang, H.Y. Chen & Z.W. Huang
The application of wavelet filter in static synchronous compensator
L. Zhang & N. Liu
Fractional-order differential application and research in pavement cracks image enhancement
W. Jiang, Y.W. Liu & H. Zhang
Molecular algorithm in solving the shortest path problem of the application and research
L. Zhang
A method about video quality assessment in video phone service over 3G network
C. Feng, L.F. Huang & W.J. Xu
Analysis on the degree of the international fragment of China’s manufacturing industry based on processing trade
Y.H. Yang
The voltage-controlled low-pass filter based on FPGA frequency measurement
Sh.Q. Ma, L.R. Zheng, J.F. Liu & Y.P. Ji
Departure capacity assessment of close staggered parallel runways
J.G. Kong, X. Li & W.B. Ding
The control design of blast furnace clay gun play mud quantity
B.H. Jiang, J. Mei, X. Zhao, D.C. Gao & H. Liu
Research and implementation of coal traffic video management system based on the technology of image tracking and recognition
S.J. Jin
Residents air conditioning load management model studies and impact analysis
B. Li, S.W. Li, S.X. Zhang, X.S. Jing, F. Wu & X.J. Weng
Multi-objective optimized scheduling for hydro-thermal power system
W.J. Liu & P.F. Cheng
An optimal space-borne Solid-State Recorder based on domestic chips
S. Li, Q. Song, J.W. Song, W. Wang, Y. Zhu & J.S. An
Study on additional damping controller for VSC-HVDC to prevent low-frequency oscillation
Z.H. Wang, Y. Li & X.Y. He
Lightning surge analysis for 220 kV AC double circuit transmission line using LPTL
Y. Ma, C.S. Liu, Y. Liu, G. Chen, T.X. Xie, Z.C. Zhou & F.B. Tao
Fault analysis of Metal Oxide Varistor (MOV) for series compensation capacitor banks
Y. Ma, Y. Liu, P. Li, G. Chen & Z.Z. Zhou
Experimental study of the human retinal security by LED light
L. Zhao, L. Lu, Sh.Y. Ren, L.Q. Geng & C.T. Li
Analysis of the phenomenon in LFO of AC electric locomotive
J.J. Ding, Y. Tu & S.B. Gao
The prototype of fatigue damage detection by the method of Metal Magnetic Memory Testing
X.Y. Yu & X.Y. Fu
Rotor composite faults diagnosis of asynchronous motor based on complex power
Zh. Wang, Zh.F. Lin, Ch. Li & Zh. Zeng
Commissioning and operation of Heze some leather wastewater treatment plant
K. Wang, B. Liu, H.D. Zhang & W. Zhao
Engineering depth treatment of pharmaceutical wastewater by magnetization catalytic oxidation-A2O-MBR combined process
W. Zhao, B. Liu, H.D. Zhuang, K. Wang & H.D. Ji
Study of broadband microstrip circulator using YIG single crystal
Zh.Q. Cheng, Y. Luan, M.Sh. Jia & X.X. Lian
Decoupling mechanism for suspension laryngoscopy using a curved-frame trans-oral robotic system
X.Y. Fu, X.Y. Yu & J.T. Seo
Calculation and analysis on shunt coefficient of short-circuit current inside Fuzhou 1000 kV Ultra-High Voltage substation
B. Zhang, B. Tang, W.H. Ma & J.Y. Zou
Mechanical analysis of reliability test device of Head-Up Display’s retraction and extension
Y.G. Liu & Y.X. Wang
Study on electromagnetic loop rejection in Liaoning power grid
K. Gao & Zh.H. Wang
Study on effect of evaluating corrosion inhibitor for circulating cooling water in dynamic simulation method
Y.P. Li, Y. Li & F. Liu
Research on the impulse current dispersal characteristics of tower grounding devices
Ch.Ch. Zhu, T. Wang, X.F. Tong, P.X. Xing, Zh.Q. Feng, H.L. Lu & L. Lan
Innovative design of centrifugal oil press
C.Q. Zhong & Y.L. Zhang
Analysis of the centrifugal oil press vibration
C.Q. Zhong & Y.L. Zhang
HPLC method for determination of concentration of Nifekalant in human plasma
X. Xie
Research of over-voltage in air-core reactor using Waveform Relaxation based on Lanczos
L.M. Bo, B. Bao & Y. Xu
The design of automatic sorting and staking system based on PLC S7-200
L.Y. Fang, X.Y. Zhou, F.G. Wu & X. Zhang
Study of dynamic optimized allocation policy for AGC regulation power based on fuzzy-Q learning algorithm
H. Qian, L. Zhou, W.X. Jin & J.B. Luo
Fault diagnosis of rolling bearing based on Fisher Discriminant Analysis
W.B. Zhang, Ch.G. Liang & G.Ch. Li
The voltage coordinated control strategy of the power grid which includes large scale wind power
R. Shi, R. Jiao, Z.J. Chi & X.N. Kang
Research on predict Direct Capacitor Power Control of voltage source PWM rectifier, applied to electric vehicle charging and discharging field
Ch. Gong, L.F. Ma, Zh.J. Chi, W. Li, B.Q. Zhang & Y.T. Zhao
Development of 2500V SMB-seagull SiC JBS diodes
G. Chen, Q.M. Zhang, S. Bai, A. Liu, L. Wang, R.H. Huang, D.H. Li & Y.N. Li
Feature-based intelligent machining method based on NX
X.H. Zhan & X.D. Li
The application of Analyze Formability-One-Step in progressive die strip design
X.D. Li & X.H. Zhan
The research on the signal reconstruction of the angular rate sensor
L.Y. Yuan, W.G. Zhang & X.X. Liu
Research on the application of Beidou and GPS dual-mode timing system in the space flight tracking ship
F. Zhang, Y.B. Ren & Y. Zhou
Study of the wind-thermal allocation ratio for wind and thermal bundled power as a source to participate in power planning
X.M. Cao, T.Q. Liu, X.T. Hu, Z.H. Chen, F.J. Wang & T.Y. Guan
A design method of inductance-capacitance filter circuit for reducing current harmonics of high-speed motor
Y.Q. Mo & P.J. Dong
Burr detection algorithm based on machine vision
Zh. Shi, Ch.L. Xi, H.L. Li, F.Sh. Tan & J.F. Yan
Numerical simulation and experimental study on the anti-overload ability of cylindrical roller bearing in a short time
Y.G. Ni, Y. Li, S.E. Deng & X.F. Li
Numerical simulation and analysis of wavefront reconstruction iterative method in radial shearing interference
Y.F. Wang & Z.S. Da
Minimization of stator loss for high speed permanent magnet motor
X.Q. Liu
Iterative Adaptive Algorithm based on the cross covariance matrix of acoustic pressure and particle velocity
C.R. Zhang, J.F. Cheng & B.L. Ma
A method to establish a continuous operational reference station in urban districts
S.B. Wang, X.J. Du, H.J. Li & W.P. Xu
The research on the leak repairing method of the recoil mechanism
N. Li, W. Jiang, H.P. Guo, S. Wang & L.M. Chen
Image retrieval research based on feature points and affine invariant moments
B.Q. He & Z.M. Wang
Research on Electric Vehicle development in Beijing
L. Zhang, M.Y. Pan, Z.J. Chi, Y.X. Chen & X.N. Kang
Lubrication performance analysis of three axial-grooved gas-lubricated journal bearing with micro grooves
Y.J. Lu, F.X. Liu, Y.F. Zhang, C. Tian & M. Li
A new configuration of current source converter applied in HVDC
J.Y. Zhao, F.M. Zhang, F.G. Liu & Y.H. Liu
Application of high-order grey forecast model in the short-term load forecasting
X.Y. Huang & L. Yang
Offshore wind power scale development trends and related policy research
Y. Zeng, J.S. Luo, X.L. Wang, P. Song, H.W. Huang & H.L. Bao
A power response characteristics equivalent model for the hybrid energy storage system
P. Chen, F. Xiao, X.W. Wang, H. Yang, Z.L. Yang & L.J. Wang
The research for power allocation strategy of the hybrid energy storage units in distributed generation system
Z.L. Yang, P. Chen, L.J. Wang, Y.H. Wang, F. Xiao, X.W. Wang & H. Yang
Research on the control of temperature of batch reactors by multi-media in the reactor jacket
H.B. Li, D.Y. Feng & H. Liu
Three-phase voltage source PWM rectifier based on space-vector algorithm and one-cycle control
L.F. Ma, Ch. Gong, Zh.J. Chi, J.M. Cao & L. Zhu
Joint positioning method with radar based on wavelet entropy
H. Yu, J. Liu, M. Wang, R. Guo & Y. Yang
Optimal design of locking pin for surface AUVs launcher under uncertainty
S.Q. Yang
A low temperature drift and heavy load bandgap reference voltage with adjustable output
X. Xu & J. Jiang
Analysis of energy coupling between the computer chassis and electromagnetic pulse
J. Liu, Y.F. Wang, Z.X. Chen & C.D. Yu
Analysis of electromagnetic shielding effectiveness of the chassis with holes under different polarization directions
Q.B. Deng, C.D. Yu & Z.P. Lian
Analysis of characteristic parameters of pulse impact on the electromagnetic coupling of the chassis
C.D. Yu, Z.X. Chen, Y.F. Wang & J. Liu
A new type of control method for the variable-speed wind turbines based on the PID neural network
T. Li, X.Y. Hou, H.Y. Lin, Q.Y. Liu, L. Zhao & H.J. Liu
Research on the control method for the torque of wind generator based on data-driven
T. Li, X.Y. Hou, H.Y. Lin, L. Zhao, H.J. Liu & Q.Y. Liu
Construction of robustly stable interval polynomial
T.A. Ezangina, S.A. Gayvoronskiy & S.V. Efimov
A MEMS digital seismometer with new structure
J. Guo & S.H. Xu
A type of real-time vibration monitoring system based on Ethernet and RS-232
S.H. Xu, J. Guo & P.P. Li
Study on the transient voltage stability of distribution systems considering large-scaled dispersed EV charging
Y.X. Chen, Z.J. Chi, P.W. Zheng & X.N. Lin
Fault diagnosis and failure rate analysis of power transformer based on cloud relation space model
L.J. Guo & S.M. Tao
Analysis on technical innovation and regional disparities growth of China
J. Xiong & W.W. Zhang