책 이미지
eBook 미리보기
책 정보
· 제목 : Tribomaterials (Hardcover) (Properties and Selection of Materials for Friction, Wear, and Erosion Applications)
· 분류 : 외국도서 > 기술공학 > 기술공학 > 재료과학
· ISBN : 9781627083218
· 쪽수 : 477쪽
· 출판일 : 2021-03-30
· 분류 : 외국도서 > 기술공학 > 기술공학 > 재료과학
· ISBN : 9781627083218
· 쪽수 : 477쪽
· 출판일 : 2021-03-30
목차
- Chapter 1 - Tribology, Tribosystems, and Related Terminology
- 1.1 Wear of Materials
- 1.2 Tribology
- 1.3 Tribomaterials
- 1.4 Terminology
- Chapter 2 - The Mechanisms and Manifestations of Friction
- 2.1 Historical Development of Concept
- 2.2 Friction Laws
- 2.3 Types of Friction and Mechanisms
- 2.4 Friction is Energy Dissipation
- 2.5 Rolling Friction
- 2.6 Friction Produced by Fluids
- 2.7 Measuring Friction Forces
- 2.8 Effect of Speed Force and Environment on Friction
- 2.9 Lubricated Friction
- Chapter 3 - Dealing with Friction in Design Engineering
- 3.1 Use of Coefficients of Friction
- 3.2 Determination of Friction Coefficients for Tribosystems
- 3.3 Rolling Friction
- 3.4 Lubricated Tribosystems
- 3.5 Metal-to-Metal Friction
- 3.6 Plastic-to-Metal and Plastic-to-Plastic Friction
- 3.7 Elastomer Friction
- 3.8 Friction of Ceramics
- 3.9 Friction Materials
- Chapter 4 - Types of Wear and Erosion and Their Mechanisms
- 4.1 The Difference Between Wear and Erosion
- 4.2 Types of Erosion
- 4.3 Types of Wear
- 4.4 Tribocorrosion
- 4.5 Biotribology
- Chapter 5 - Tribotesting
- 5.1 The Need for Tribotesting
- 5.2 Tribotesting Methodology
- 5.3 General Considerations
- 5.4 Erosion Testing
- 5.5 Adhesive Wear Testing
- 5.6 Abrasion Tests
- Chapter 6 - Tribological Properties of Copper Alloys
- 6.1 Applications
- 6.2 Mechanical Properties
- 6.3 Physical Properties
- 6.4 Forms Available
- 6.5 Friction
- 6.6 Adhesive Wear
- 6.7 Abrasive Wear
- 6.8 Erosion
- Chapter 7 - Tribological Properties of Cast Irons
- 7.1 Introduction
- 7.2 Metallurgy
- 7.3 Physical Properties
- 7.4 Mechanical Properties
- 7.5 Chemical Properties
- 7.6 Important Grades for Tribological Applications
- 7.7 Friction
- 7.8 Adhesive Wear
- 7.9 Abrasion Resistance
- 7.10 Erosion
- Chapter 8 - Tribological Properties of Steels
- 8.1 Introduction
- 8.2 Forms Available
- 8.3 Metallurgy
- 8.4 Physical Properties
- 8.5 Mechanical Properties
- 8.6 Friction
- 8.7 Adhesive Wear
- 8.8 Abrasive Wear
- 8.9 Erosion
- 8.10 Cast steels
- Chapter 9 - Tribological Properties of Stainless Steels and Other Corrosion-Resisting Metals
- 9.1 Corrosion and Wear
- 9.2 Stainless Steels
- 9.3 Other Metals Used for Corrosive Service
- 9.4 Light Metals
- Chapter 10 - Tribological Properties of Ceramics, Cermets, and Cemented Carbides
- 10.1 Introduction
- 10.2 Ceramics
- 10.3 Cermets
- 10.4 Cemented Carbides
- Chapter 11 - Tribology of Plastics and Elastomers
- 11.1 Typical Uses
- 11.2 Plastics Properties
- 11.3 Plastics for Abrasive Wear Applications
- 11.4 Friction in Plastic Tribosystems
- 11.5 Plastics for Adhesive Wear Applications
- 11.6 Plastics for Erosion Applications
- 11.7 Polymer Composites
- 11.8 Rubbers and Elastomers
- Chapter 12 - Material Modifications (Coatings, Treatments, etc.) for Tribological Applications
- 12.1 When to Use Materials Modifications
- 12.2 The Spectrum of Modifications
- 12.3 Modifications to Harden Surfaces
- 12.4 Material Modifications for Improved Lubrication
- 12.5 Treatments for Appearance
- 12.6 Treatments for Corrosion Resistance
- 12.7 Treatments for Abrasion Resistance
- 12.8 Friction
- 12.9 Adhesive Wear Treatments
- 12.10 Treatments of Erosion
- Chapter 13 - Biotribology
- 13.1 Introduction
- 13.2 Dental Tribology
- 13.3 Orthopedics
- 13.4 Sensing and Perception
- 13.5 Personal Care Products
- 13.6 Medical Devices
- 13.7 Eyewear Materials
- 13.8 Biocompatibility
- 13.9 Skin
- Chapter 14 - Tribology of Lubricants
- 14.1 Oils
- 14.2 Greases
- 14.3 Solid Lubricants
- 14.4 Metal Working Fluids
- 14.5 Traction Fluids
- 14.6 Lubrication Fundamentals
- 14.7 Lubricant Life
- Chapter 15 - Selection of Materials for Tribosystems
- 15.1 The Role of Tribology in Selection
- 15.2 Copper Alloys
- 15.3 Cast Irons
- 15.4 Steels
- 15.5 Stainless Steels and Corrosion-Resisting Metals
- 15.6 Nickel Alloys
- 15.7 Titanium Alloys
- 15.8 Gold and Silver
- 15.9 Zinc
- 15.10 Tin
- 15.11 Aluminum Alloys
- 15.12 Ceramics, Cermets and Cemented Carbides
- 15.13 Plastics and Elastomers
- 15.14 Selection of Material Modifications
- 15.15 Lubricant Selection
- 15.16 Selection Methodology
- 15.17 Use of a Selection Matrix
- Chapter 16 - Appendix
